16th Edition Electrical Equipment
Test Box
The 2080 is housed in a robust plastic case with integral handle - ideal for on site use.

Designed with low cost and portability in mind, the use of the 2080 provides on or off site verification of RCD Testers, LOOP Testers, Continuity and Insulation Testers.

The 2080 is simple to use and provides the following functionality:

Checking of Insulation Testers
• 3 high value resistors (1M Ohms, 9.9M Ohms & 99M Ohms) for testing the resistance measurement function.
• LED indication of test voltage at 100V • 250V • 500V • 1000V
• 3 low value resistors ( 0.5 Ohms, 2 Ohms & 10 Ohms) for testing the continuity function.
• AC line voltage output for testing voltage measurement

Checking of RCD Testers
• Dedicated 13A socket provides functional check of RCD tester operation
• 3 selectable ranges : 10mA @150ms, 30mA @150ms, 150mA @150ms
• Indicators for Ready • Tripped • Overcurrent

Checking of LOOP Testers
A functional check of LOOP Testers, allowing direct measurement of supplied loop impedance and supplied loop impedance + 1 Ohm via a dedicated 13A socket.

Wiring Check
When connected, the 2080 checkbox will indicate voltage between the following wires *
P-E (Phase to Earth) • P-N (Phase to Neutral) • N-E (Neutral to Earth)
* Does not detect Neutral to Earth reversal