• approved distributor

    Buy or Hire Test Equipment
    Repair | Calibrate | Training

  • product advice and demos

    Product advice & demos
    Aftersales support

  • competetive prices

    Competitive quotes
    Bespoke deals

  • approved distributor

    Approved distributor
    Approved service centre

 

Be the first to review this product

Megger
DLRO200 Low Resistance Ohmmeter - 200A No Lead Set


Megger DLRO200 Digital Low Resistance Ohmmeter designed to test circuit breaker contacts, switch contacts, busbar joints or other applications where high current is needed.

Part Number:
DLRO200-EN-NLS

read more

 

Need Help ? Contact Us Request Demo Browse Accessories
Acutest's Price Promise
  • Competitive quote
  • Expert technical advice/demos
  • Trusted aftercare support

Product Options

 

Manufacturer's RRP

£6130.00
7356.00 incl. VAT)
Add To Cart
  • Competitive quote
  • Expert technical advice/demos
  • Trusted aftercare support

 

 

 

Megger DLRO200 Low Resistance Ohmmeter


Megger DLRO200 Key Features:

  • Small and weighs less than 15 kg (33 lbs)
  • Test currents from 10 A to 200 A d.c.
  • Measures resistances between 0.1 μΩ and 1 Ω, at high currents.
  • 0.1 μΩ best resolution
  • On board memory for up to 300 test results and notes
  • Add notes to any stored result by using the on board alphanumeric keypad
  • A large liquid crystal display
  • RS232 port to download stored results or for real time output to a printer
  • Supplied complete with 5m (16.4 ft.) test leads and download software
  • Smooth, continuous applied current eliminates magnetic transients capable of inductively tripping breaker controls (115 V version)


Megger DLRO200 Test Modes:

DLRO200 operates in one of three modes, which are simply selected from the on screen menu.

CONTINUOUS mode is provided for users who wish to monitor a resistance over a period of time.  Connect the test leads, select the test current and press the TEST button. DLRO200 will pass a current continuously, and measure the resulting voltage at 2- second intervals, until the test button is pressed to stop the test or the test circuit is interrupted.

In NORMAL mode you connect the leads, select the test current and press the TEST button. The test current will ramp up to the desired level, hold for 2 seconds and then ramp down. The whole process  takes approximately 10 seconds.

In AUTO mode select the desired current, connect the current leads and press the TEST button. The TEST lamp will flash to show that the DLRO200 is ready to carry out a test. As soon as the potential leads are connected, a test will start. To repeat a test, simply break contact with the voltage probes and remake contact.

Measuring individual joints in a busbar is a good example of the convenience to  be  gained  by  using  AUTO  mode. The two current leads are connected to the ends of the busbar.  They will remain connected here until all tests have been completed. When the voltage leads make contact across a joint, DLRO200 detects that all four leads are connected, carries out a test and stops. When you move to the next joint DLRO detects the new completed circuit automatically and carries out the next test, and so on until all joints have been tested.

The results may be stored automatically and may be recalled to the display or downloaded for review.

 

Comparison Chart for: Megger DLRO200 Low Resistance Ohmmeter - 200A No Lead Set

DLRO600DLRO200MOM690AMOM600MOM200AMJOLNER 600MJOLNER 200MOM2DLRO100 E/X/H
Test currents10 A-600 A10 A-200 A0-600 A0-600 A0-200 A5 A-600 A5 A-200 A50 A -220 A10 A - 100A
Current steps1 A1 A1 A1 A1 A
Max. test time continuous at>60 sec>10 min10 sec15 sec20 sec15 sec2 min3 sec - discharging10 min
Measurement range0.1 µΩ-999.9 mΩ0.1 µΩ-999.9 mΩ0-200 mΩ0-1999 µΩ0-19.99mΩ0-999.9 mΩ0-999.9 mΩ0-1000 mΩ0.1 µΩ-1.999Ω
Best resolution0.1 µΩ0.1 µΩ1.0 µΩ1.0 µΩ1.0 µΩ0.1 µΩ0.1 µΩ1.0 µΩ0.1 µΩ
Ripple free DC
DualGround100x / 100H
Remote control
Built-in printer
Result storage100X / 100H
Downloading to PC100X / 100H
Power supply
Mains
Rechargeable batteryoptional
Weight14.5 kg14.5 kg23.7 kg24.7 kg14.6 kg13.8 kg13.8 kg1.0 kg7.0 / 7.9 kg

 

Accessory Code Description Price (Ex VAT)
1001-653 USB - RS232 Adaptor £70.00 ADD
25955-025 Serial PC Download Lead £12.00 ADD
35871 USB-serial Adaptor £47.00 ADD
6220-756 10m Lead Set - 2 x 70mm 2 Current Leads with Clamps and 2 x Potential Leads with Clips £955.00 ADD
6220-757 15m Lead Set - 2 x 95mm 2 Current Leads with Clamps and 2 x Potential Leads with Clips £1,685.00 ADD
1008-029 Lead Set DLRO200-115 (5m) 4 Leads - 2 x 25mm 2 Current Leads £430.00 ADD

 

 

ONLY REGISTERED USERS CAN WRITE REVIEWS. PLEASE SIGN IN OR CREATE AN ACCOUNT