Megger Seba
PIL 8 Cable and Phase Identifier


Megger Seba PIL 8 Phasenlux has been designed for phase identification in earthed & short-circuited medium voltage Cables.

Part Number:
813353

read more

 



List Price:

£6640.00
7968.00 incl. VAT)
Add To Cart

 

 

Megger PIL 8 Phasenlux - Phase Identification - Earthed / Short-circuited MV Cables

Megger Seba PIL 8 has been designed for phase identification in earthed and short-circuited medium voltage cables.

The phase identification instrument PIL 8 meets these  requirements: it eliminates the need to disconnect the short-circuiting and earthing circuit. After installing the three pairs of clamps, the doors of the chamber can be closed. The Phasenlux PIL 8 works with three pairs of transceiver clamps: one of each is connected to the short-circuited phases without any connection leads (power supply is not required!). At the other end of the cable (cutting point,  other substation, etc.) an audio frequency current is fed into the cable by means of a battery operated audio frequency generator. This audio frequency current generates a voltage in the transceiver clamps which is recorded and stored in a capacitor. There is a small audio frequency generator  inside the transceiver clamps that, as soon as a DC voltage is connected, transmits a coded signal to the receiver indicating the designated phase connected to each pair of clamps. Now, the audio frequency generator at the cutting point of the cable is used as a receiver which displays the transceiver clamps’ signal.


Megger PIL 8 Key Features:

  • Maintenance free transceiver clamps
  • Suitable for any type of switchgear
  • Requires only one person
  • Easiest operation
  • Absolute safe phase identification

 

 

Technical Specification for: Megger Seba PIL 8 Cable and Phase Identifier

Product Downloads

 

 

Product Training 1/2 Day more info
Product Awareness Course

Get to know your new purchase! Maximise your return on investment with product and software training modules!

A lack of product training can result in under-utilisation of test equipment, low return on investment and, most importantly, incorrect use.

Product Training 1 Day more info
Product Awareness Course

Get to know your new purchase! Maximise your return on investment with product and software training modules!

A lack of product training can result in under-utilisation of test equipment, low return on investment and, most importantly, incorrect use.



We remain operational for Test Instrument Sales, Calibration, Servicing and Repair.

We are open and here to help support your business.

For more information click here

COVID-19: We're Open & Operational