Fameca MTag High Voltage Detectors
Designed for "proving dead" on high voltage distribution system between 1 kV and 69 kV (voltage ranges calibrated according to IEC recommendations). The MTag detects any nominal voltage present on a overhead line or in a substation.
The MTag meets all the expectations and wishes expressed by users and experts in recent years.
Fameca MTag Key Features:
- Reliable indication
- Detects nominal voltages of its range
- Eliminates related induced voltages
- Enhanced audible and visual signals perceptible in most conditions
- Heavy duty and reliable design
- Direct access to the battery
- Sealed, watertight electronic compartment
- Stick end fittings interchangeable by the user, no tools required
Fameca MTag Built for Your Environment
Enhanced audible indication
- Powerful audible indication that can be heard clearly and precisely
- 100 dB audible signal (at 1 meter)
- Audible above traffic noise or strong winds, thanks to natural amplification by an acoustic horn
Operating reliability
- Low battery level indicated by a dedicated ORANGE LED
- Latest generation of electronics controlled by a processor and enclosed in a dedicated sealed compartment to avoid moisture ingress
- The battery can be replaced in any condition
- Compliant with IEC 61243-1
- Detection thresholds calibrated on real voltages (HV)
Direct access to the battery, watertight sealed electronics compartment
- Built to prevent inadvertent mis-assembly of housing and electronics
- Battery easily changed in the field, even in difficult conditions (bad weather, difficult worksite, etc.)
- Easy opening of compartment with a cover preventing the battery falling out
- Does not require access to the electronics
Enhanced visual indication
- Visual indication visible in sunlight and fog
- Wide angle of view and side view thank to the optic ring
- When the self-test is OK (device ready for use) and there is no nominal voltage in the range calibrated, device displays a GREEN
indication- If a nominal voltage in the range calibrated or a higher voltage is detected, device displays a RED
indication and start a blipping sound
Fameca MTag Options:
See data sheets for different models
MTAG Voltage Detector 10-36 kV, Metal Case, Universal and APV Stick Adaptor* (* other stick adaptors are available on request)
MTAG Voltage Detector 10-36 kV, Soft Case, Universal and APV Stick Adaptor* (* other stick adaptors are available on request)
MTAG DR Multi Voltage Detector 1-69 kV, Metal Case
MTAG DR Multi Voltage Detector 1-69 kV, Soft Case
MTAG X 1 - 69 kV Voltage Detector Multi Range