Fameca TAG 200 Voltage Detector (11/33kV)
(Formally known as Clydesdale TAG200)
The TAG 200 Voltage Detector is a voltage detector for the MV networks designed to check the absence of nominal voltage by direct contact with the line it is usually used prior to the earthing operation of a three-phase voltage system.
Fameca TAG 200 Key Features:
- Robust white polycarbonate shell to be used in MV substations through 60 mm diameter spy holes
- Absence of voltage indicated by 1 green LED
- The presence of voltage indicated by 1 red LED and audible signal by buzzer
- Built-in ‘All check‘ test provides checking of all electronic and battery level
Fameca TAG 200 Technical Specification:
AC voltage range possible choice from 1 to 36 kV Network frequency: 50 or 60 Hz
- Category: L = without electrode extension
- Can be used under light rain after whipping with silicone cloth!
- Temperature: -25°C to +55°C
- Power supply: 9 V alkaline battery 6LR61
- Dimensions: Ø 49 mm, L = 195 mm excluding electrode
- Weight: 0,280 kg
Limitation: Distance between phase and ground must be above the following *
Low Voltage (kV) | Ph-G distance (mm) |
| Un < 12 | 150 |
| 12 < Un < 17,5 | 180 |
| 17,5 < Un < 24 | 215 |
| 24 < Un < 36 | 325 |