• approved distributor

    Buy or Hire Test Equipment
    Repair | Calibrate | Training

  • product advice and demos

    Product advice & demos
    Aftersales support

  • competetive prices

    Competitive quotes
    Bespoke deals

  • approved distributor

    Approved distributor
    Approved service centre

 

Be the first to review this product

Martindale
TEK500 Microwave Leakage Detector


Martindale TEK500 Microwave Leakage Detector suitable for commercial & domestic microwave ovens, designed to comply with national standards on permitted exposure levels.

Part Number:
MARTEK500

read more

 

Need Help ? Contact Us Request Demo
Acutest's Price Promise
  • Competitive quote
  • Expert technical advice/demos
  • Trusted aftercare support

 

Manufacturer's RRP

£199.00
238.80 incl. VAT)
Add To Cart
  • Competitive quote
  • Expert technical advice/demos
  • Trusted aftercare support

 

 

 

Martindale TEK500 Microwave Leakage Detector

The Martindale TEK500 is a PASS/FAIL microwave leakage detector for testing both commercial and domestic microwave ovens. The unit is designed to comply with harmonised European standards on permitted exposure levels and it will indicate leakage levels by a simple to use traffic light system which illuminates bright LEDs.

There is a self-test feature which simulates a real microwave input, in order to ensure the unit is working correctly at all times. The leakage tester will indicate at 1, 5 and 10mW/cm2, in accordance with BS EN5175.

The full test procedure for microwave ovens also includes checking that the microwave is heating correctly. The TEK500 includes a second beaker and digital thermometer with simple instructions for checking power output to achieve full compliance with the requirements.

The microwave leakage detector kit is supplied with the leakage detector, two beakers, digital thermometer, carry case, instruction manual and battery. The manual includes the calculations to apply when measuring the microwave output.


Martindale TEK500 Key Features:

  • Simple pass / fail leakage detection
  • Complies with latest standards
  • Self test feature
  • Power output testing accessories
  • Two beakers, thermometer and carry case included


What comes with the Martindale TEK500?

  • Martindale TEK500
  • Digital Thermometer
  • Water Beaker
  • Carry Case
  • Battery
  • Instruction Manual

 

Technical Specification for: Martindale TEK500 Microwave Leakage Detector

Frequency of operation2450MHz ± 25MHz
Threshold Accuracy±1dB for planewave of all polarisations
Cardinal points>1mW/cm2, >5mW/cm2, >10mW/cm2
Response to step input2-3 seconds to reach 90% of steady state indication
Overload capacity50mW/cm2
IndicatorsLED (green) – battery OK
LED (yellow) – 1mW/cm2 – acceptable microwave leakage below safety limit
LEDs (red) at 5 & 10mW/cm2 and audible tone – hazardous microwave leakage above safety limit
Cone spacerprescribed test distance of 50mm is achieved when cone tip is in contact with appliance
Operating temperature-5°C to 40°C
Complies withBS EN 60335-2-25:2002
BS EN 60335-2-90:2002
Supply9V alkaline battery, MN1604 or equivalent
Dimensions145 x 64 x 30mm
Product Downloads

 

 

 

ONLY REGISTERED USERS CAN WRITE REVIEWS. PLEASE SIGN IN OR CREATE AN ACCOUNT