Metrel BUNDLE S 2111 Safety Test System with Two-Hand Control
Make high-voltage test initiation a deliberate two-hand action.
The Metrel BUNDLE S 2111 Safety Test System with Two-Hand Control enables hazardous testing through two independently monitored controls. Both buttons must be activated within the defined time window and held during the test.
Built around the MI 3394 CE MultiTester XS, the bundle is suited to larger electrical devices requiring protective earth continuity checks at multiple accessible metal parts.
Request a Metrel BUNDLE S 2111 quote today. Tell us about your test station requirements.
Metrel BUNDLE S 2111 Key Features:
- Two-hand activation: both controls must meet the required timing conditions
- Continuous input monitoring: supervises the two safety controls throughout testing
- Automatic test interruption: disables testing if a button is released, synchronisation is lost or a fault occurs
- Residual energy discharge: included in the system’s protective response
- Production test hardware: A 1600 CE Switch, A 1688 connection box and visual warning indication
Why choose the Metrel BUNDLE S 2111?
Bring protective earth continuity checks and high-voltage testing into a station with a defined operator enable command. This bundle suits manual and production work where the two-hand control principle matches the required test station design.
What Comes with the Metrel BUNDLE S 2111?
- MI 3394 CE MultiTester XS
- (S 2111) Safety system with two-hand control
- (A 1600) CE Switch, 5 kV
- (A 1688) Universal connection box
- (A 1496) Two-LED warning lamp with magnet
- (A 1584) Rack mount adaptor
- (A 1690) Start button and A 1696 communication cable, 3 m
- (A 1495) PL adaptor for pedal and signal lamps
- (A 1017) RS232 cable and A 1727 USB Type A/B cable
- 2 x (A 1728) Power cables, 2 m, 3 × 0.75 mm²
- (A 1493) Power cable, 2 m, 3 × 1.5 mm²
- (A 1645) XA multifunctional test cable, 1.5 m
- 2 x (A 1695) Yellow/green earth cables, 2 m, 2.5 mm²
- (A 1601) Red and A 1602 blue HV test leads, each 1.5 m, 5 kV
- 2 x (A 1076) Black/red test cables, 2.5 m, 2.5 mm²/0.75 mm²
- (A 1710) Red test lead, 1.5 m, 2.5 mm²
- (A 1064) red crocodile clip
- Calibration certificate, short instruction manual and instruction manual
- Metrel ES Manager BASIC licence and SW 1201 software installation
Test cages and protective enclosures are not included.
| Features | |
| Core instrument | MI 3394 CE MultiTester XS |
| Safety system | S 2111 with two-hand control |
| Test enable condition | Both buttons activated within the defined time window and held |
| Interruption triggers | Button release, loss of synchronisation or fault |
| Protective response | Hazardous circuits disconnected; residual energy discharged |
| HV switching unit | A 1600 CE Switch, 5 kV |
| Connection interface | A 1688 universal connection box |
| Additional control cable | A 1696 communication cable, 3 m |
| Warning indication | A 1496 two-LED lamp with magnet |
| Software | Metrel ES Manager BASIC; SW 1201 |
| Calibration certificate | ✓ |
❓ Frequently Asked Questions (FAQ)
Q1: Do both controls need to remain pressed?
A. Yes. Hazardous testing is enabled only while the two-hand command is maintained and the safety conditions are fulfilled.
Q2: What happens if one button is released?
A. The safety module disables the test, disconnects hazardous measurement circuits and provides residual energy discharge.
Q3: Is this bundle intended for larger devices?
A. Yes. Metrel identifies larger electrical devices requiring protective earth continuity checks across multiple accessible metal parts as a suitable application.
Request a Quote for the Metrel BUNDLE S 2111
Tell us about your device size, continuity test points and testing sequence. We can help you assess whether two-hand control suits your station.
Enquire today for your Metrel BUNDLE S 2111 quotation.