• approved distributor

    Buy or Hire Test Equipment
    Repair | Calibrate | Training

  • product advice and demos

    Product advice & demos
    Aftersales support

  • competetive prices

    Competitive quotes
    Bespoke deals

  • approved distributor

    Approved distributor
    Approved service centre

 

Be the first to review this product

Metrel
MI 3100S EurotestEASI Multifunction Tester


Metrel MI 3100s EurotestEASI Multifunction Tester is perfect for initial & periodic testing of domestic & industrial installations. Testing of single- multi-phase systems & testing of TT & TN supply systems.

Part Number:
MI3100-S

read more

 

Need Help ? Contact Us Request Demo Browse Accessories
Acutest's Price Promise
  • Competitive quote
  • Expert technical advice/demos
  • Trusted aftercare support

 

Manufacturer's RRP

£645.00
774.00 incl. VAT)
Add To Cart
  • Competitive quote
  • Expert technical advice/demos
  • Trusted aftercare support

 

 

 

Metrel MI 3100s EurotestEASI Multifunction Tester

Metrel MI 3100 s EurotestEASI is a fast, accurate and easy to use multifunctional measuring instrument which performs a basic set of installation safety tests according to IEC/EN 61557. Besides, the MI 3100 s EurotestEASI enables on-line voltage monitoring, phase sequence testing and earth resistance measurement. EurotestEASI is equipped with integrated characteristics of fuses and RCDs for PASS / FAIL evaluation of test results.

 

Metrel MI 3100s Key Features:

  • Built-in help screens for referencing on site
  • Built-in fuse tables for automatic evaluation of the line / loop impedance result
  • On-line voltage monitoring: monitors all 3 voltages in real-time
  • Polarity swap: automatic polarity reversal on continuity test
  • Trip Lock function: loop impedance test without tripping the RCD
  • Built-in charger unit has a built-in charging circuit and comes complete with a set of rechargeable NiMH batteries
  • RCD auto: automated RCD testing procedure
  • To see the difference between the MI 3100S and the MI 3100SE see the Comparison Chart [PDF]

 

Metrel MI 3100s Measuring Functions:

  • Insulation resistance with DC voltage from 50 V to 1000 V
  • Continuity of PE conductors with 200 mA test current wit polarity change
  • Continuity of PE conductors with 7 mA test current without RCD tripping
  • Line impedance
  • Loop impedance
  • Loop impedance with Trip Lock RCD function
  • TRMS voltage and frequency
  • Phase sequence
  • RCD testing (general and selective, type AC, A, F)
  • Earth resistance (3-wire method)

 

Metrel MI 3100s Applications:

  • Preventative maintenance
  • Earth continuity and insulation testing
  • Line and loop impedance and RCD testing
  • Basic earth resistance
  • Voltage measurements
  • Current measurements
  • Frequency measurements
  • Troubleshooting
  • Installation troubleshooting

 

What comes with the Metrel MI 3100s (Standard Set)?

  • MI 3100s EurotestEASI Multifunction Tester
  • Power supply adapter with mains cable
  • 6 x NiMH rechargeable batteries, size AA
  • 3 x Test probes (brown, blue, green)
  • 3 x Crocodile clips (brown, blue, green)
  • 3 x 1.5m Test leads
  • UK measuring cable
  • Soft carrying bag
  • Soft carrying neck belt
  • Short instruction manual
  • Instruction manual on storage media
  • Handbook on storage media
  • Calibration certificate

 

EuroLink PRO Software is included in the SE model/kit only (not included in the S version/Standard version).
The SE model is (MESM) PC Software compatible also (Metrel Electrical Safety Manager Software)

 

Comparison Chart for: Metrel MI 3100S EurotestEASI Multifunction Tester

MI 3125 BTMI 3100 SEMI 3152MI 3155
Screen type
Monochrome dot matrix
Full colour dot matrix
Touch screen
Instrument control
Rotary switch
Push keys
Functions
3-wire Trip-Lock RCD function, with no reported RCD uplift
Hi current loop test for L-L and L-N testing and where there is no RCD
PFC and PSCC displayed with loop impedance
Operating frequency45Hz to 65Hz45Hz to 65Hz45Hz to 65Hz14Hz to 500 Hz
Earth loop impedance ranges
3-wire loop test
Fuse tables on-board for instant pass or fail
Z auto func., Ze, Zs, PFC, PSCC and touch voltage with the single press of test button
Ultra-low current test for vehicle charge point testing
Supports Hi resolution testing with A 1143 adapter
4-wire loop test for result close to the source of supply
50V, 100 V, 250 V, 500 V and 1 kV test voltages
2.5 kV test voltage
Applied voltage display
Insulation test ranges
Pass of fail against pre-set limits
AUTO L-PE, N-PE and L-N testing
Surge protection or varistor testing
Diagnostic tests PI and DAR
AC RCD rating 10 mA, 30 mA, 100 mA, 300 mA, 500 mA and 1000 mA
RCD Type A, Type AC, Type F
RCD Type B and Type B+ - pure DC
Standard or time delayed
RCD testing ranges
Portable RCDs type PRCD, PRCD-2P, PRCD-3P, PRCD- S, PRCD- S+ & PRCD- K
EV RCM / EV RCD 30 mA AC and 6 mA DC*
Phase or polarity0 / 1800 / 1800 / 1800 / 180
½I, I and 5I tests
Ramp test for RCD fault finding
Continuity and low R range
Auto RCD test for trip time and trip current displayed on a single screen, no scrolling
7 mA test current for continuity check through RCD & prolonged battery life
Adjustable Pass/ fail indicator light limits
Adjustable buzzer threshold
AUTO SEQUENCE
Pre programmed
User programmable
Testing TN and TT earthing systems
Testing IT, floating earth systems
Voltage, frequency and phase rotation range
0 V to 550 V AC resolution 1V
Single-phase TN/ TT systems displays L-N, L-PE , N-PE in single screen
3-phase TN/ TT systems displays L1-L2, L1-L3 , L2-L3 in single screen
True RMS measurement
Frequency0Hz to 500 Hz0Hz to 500 Hz0Hz to 500 Hz0Hz to 500 Hz
Phase rotation
Voltage Drop measurement
Power quality range
Active power (P), Apparent power (S) and Reactive power (Q)
Power factor, Total harmonic distortion (THD)
Voltage harmonics and THD
Current harmonics and THD
Earth electrode resistance range
3-wire technique
Selective method with 3-wires and clamp*
4-wire earth resistivity*
2 clamps contactless method*
Earth test set supplied
Active safety system
Auto-test inhibit
Auto- discharge
Auto PE test
Touch voltage monitoring
Results handling / on-board memory
On-board memory size3 levels / 1700 locations3 levels / 1700 locations8 GB8 GB
Memory management
Workspace manager
Full keyboard for labelling files and results in plain English
USB, RS232 and bluetooth® connectivityOptional accessory
QR and, or barcode scanner support*
FREE Electrical Safety Management Basic software license
Other benefits
Rechargeable batteries with on-board recharging
TRMS leakage and load measurement*
Illuminance measurement*
Cable tracing*
Insulation monitoring device testing - IT systems
First fault leakage current measurement - IT systems
Records visual inspection
Full set of test, download and recharge leads
Soft test and carry bag
Firmware user updatable for product’s lifetime
Safety ratingCAT IV 300 VCAT IV 300 VCAT IV 300 VCAT IV 300 V
* Tester enabled but optional accessories required

 

Accessory Code Description Price (Ex VAT)
A1153 20 m Test Lead Black £49.75 ADD
A1154 4 m Test Lead Black £27.38 ADD
A1160 6 Cell AA battery charger £156.15 ADD
A1164 50 m Test Lead Black £85.28 ADD

 

 

ONLY REGISTERED USERS CAN WRITE REVIEWS. PLEASE SIGN IN OR CREATE AN ACCOUNT