A-Eberle PQ-BOX 200 Network Analyser and Transient Recorder
The A-Eberle PQ-Box 200 is a high-performance piece of kit combining three instruments in one: a Network-Analyser, a Power Meter and a Transient Recorder.
The portable device with IP65 protection has been developed for mobile operation, perfect for applications in electrical networks (CAT IV), and industrial environments up to 1000V measurement voltage.
A-Eberle PQ-BOX 200 Key Features:
- 3 instruments in 1, combining:
- Network-Analyser
- Power Meter
- Transient Recorder
- Power analysis
- Data logging
- Fault detection
- High-performance
- User-friendly
- Measuring of 5 currents possible (PE current or temperature sensor)
- Sampling of voltage and currents with 41 kHz
- Binary input for external trigger
- Option: Transient measuring card 2 MHz ( + / - 5.000V range)
- Up to 32 GByte memory (4 GByte as standard)
- FFT calculation up to 20 kHz
- 2 kHz to 9 kHz - FFT according to the latest standard IEC61000-4-7
- Enabled for on-line data
- TFT colour display
- One software for PQ Box 100 and PQ Box 200
- All current clamps for PQ Box 100 are suitable for PQ Box 200
- PQ-Box 200 meets 100% the demands of IEC 61000-4-30 (2015) standard for a class-A device
- Class A for:
- Accuracy of voltage measurement
- Determination of time intervals
- Marking of measurement values at events
- Harmonics, interharmonics
- Flicker
- Frequency
- Voltage asymmetry
- Event recording
- Time synchronisation
A-Eberle PQ-BOX 200 Applications:
- Fault detection
- Evaluation of voltage quality according to EN50160 and IEC61000-2-2 (2-4)
- FFT Analysis to 20kHz
- Load analysis; energy measurements
- Transient analysis to 4 MHz
- Ripple control signal analysis
- Software for PQ-Box 100 & 150 & 200
A-Eberle PQ-BOX 200 Options:
The PQ-Box 200 is optionally available with transient measuring circuit board.
(Standard unit as detailed above)
Optional "Transient measuring circuit board" (T1) with
- Programmable sampling frequency of the transient circuit board (200kHz, 500kHz, 1MHz, 2MHz, 4Mhz).
- Upgradeable
- Measurement range of transient voltage is: 5kV +
Optional "Ripple control recorder" (R1)
- Ripple control telegram of voltage and current