A-Eberle PQ-BOX 300 Network Analyser and Transient Recorder
The A-Eberle PQ-Box 300 is a high-performance portable network-analyser, frequency-analyser, power meter and transient recorder in a single device.
This device records frequencies up to 170 kHz, permanently and continuously. The portable device with IP65 protection has been developed for mobile
operation, perfect for applications in electrical networks (CAT IV) and
industrial environments up to 1000V measurement voltage.
A-Eberle PQ-BOX 300 Key Features:
- 3 instruments in 1, combining:
- Network-Analyser / Frequency-Analyser,
- Power Meter
- Transient Recorder
- Frequency analysis (up to 170 kHz)
- Data logging
- Fault detection
- High-performance
- User-friendly
- Programmable Trigger for oscilloscope-recorder
- Programmable Trigger for 10ms RMS recorder
- Standard Reports according to EN50160, IEC61000-2- 2/-2-4
- 4x voltage and 4x current
- Analog input for PE current or temperature sensor
- Binary input for external trigger
- Frequency analysis from DC to 170kHz with continuous (gapless) recording
- Simultaneous recording of more than 4000 network parameters
- Up to 32 GByte memory (8 GByte as standard)
- TFT colour display
- High quality software WinPQ mobile for configuration and data evaluation (PQ-Box 100, 150, 200 and 300)
- Option: WLAN/WiFi interface
- PQ-Box 300 entirely complies the requirements of IEC 61000-4-30 (2015) standard for a class-A device
- Class A for:
- Accuracy of voltage measurement
- Determination of time intervals
- Marking of measurement values at events
- Harmonics and interharmonics
- Flicker
- Frequency
- Voltage asymmetry
- Event recording
- Time synchronisation
A-Eberle PQ-BOX 300 Applications:
- Fault detection
- Evaluation of voltage quality according to EN50160 und IEC61000-2-2/-2-4
- Permanent FFT Analysis from DC to 170kHz
- Load analysis; Energy measurements
- Ripple control signal analysis
- High-quality Software for PQ-Box family 100/150/200/300
A-Eberle PQ-BOX 300 Options:
The PQ-Box 300 is optionally available with ripple control signal analysis and WLAN interface.
(Standard unit as detailed above)
Optional "Ripple control recorder" (R1)
- Ripple control telegram of voltage and current
Optional WLAN Interface (S1)
- Wireless communication between User-PC and PQ-Box 300