Fameca
MTAG DR 1-69 kV Multi High Voltage Detector (Metal Case)

Fameca MTag High Voltage Detectors

Designed for "proving dead" on high voltage distribution system between 1 kV and 69 kV (voltage ranges calibrated according to IEC recommendations). The MTag detects any nominal voltage present on a overhead line or in a substation.

The MTag meets all the expectations and wishes expressed by users and experts in recent years.

Fameca MTag Key Features:

• Reliable indication
  
  • Detects nominal voltages of its range
  • Eliminates related induced voltages
• Enhanced audible and visual signals perceptible in most conditions
• Heavy duty and reliable design
  
  • Direct access to the battery
  • Sealed, watertight electronic compartment
  • Stick end fittings interchangeable by the user, no tools required

Fameca MTag Built for Your Environment

Enhanced audible indication

• Powerful audible indication that can be heard clearly and precisely
• 100 dB audible signal (at 1 meter)
• Audible above traffic noise or strong winds, thanks to natural amplification by an acoustic horn

Operating reliability

• Low battery level indicated by a dedicated ORANGE LED
• Latest generation of electronics controlled by a processor and enclosed in a dedicated sealed compartment to avoid moisture ingress
• The battery can be replaced in any condition
• Compliant with IEC 61243-1
• Detection thresholds calibrated on real voltages (HV)

Direct access to the battery, watertight sealed electronics compartment

• Built to prevent inadvertent mis-assembly of housing and electronics
• Battery easily changed in the field, even in difficult conditions (bad weather, difficult worksite, etc.)
• Easy opening of compartment with a cover preventing the battery falling out
• Does not require access to the electronics

Enhanced visual indication

• Visual indication visible in sunlight and fog
• Wide angle of view and side view thank to the optic ring
• When the self-test is OK (device ready for use) and there is no nominal voltage in the range calibrated, device displays a GREEN
indication
• If a nominal voltage in the range calibrated or a higher voltage is detected, device displays a RED
indication and start a blipping sound

Fameca MTag Options:

See data sheets for different models

• (MTAG10360FCUA)

MTAG Voltage Detector 10-36 kV, Metal Case, Universal and APV Stick Adaptor* (* other stick adaptors are available on request)

• (MTAG10360FHUA)

MTAG Voltage Detector 10-36 kV, Soft Case, Universal and APV Stick Adaptor* (* other stick adaptors are available on request)

• (MTAGDR0133FCU)

MTAG DR Multi Voltage Detector 1-69 kV, Metal Case

• (MTAGDR0133FHU)

MTAG DR Multi Voltage Detector 1-69 kV, Soft Case

• (MTAGX1133FHU)
  

MTAG X 1 - 69 kV Voltage Detector Multi Range

MTag Proving Unit

The FAMECA V CHECK Proving Unit has been designed for use with the MTag.