Fameca
SPCCS140WI Power Cables Spiking; Cutting Tool

Fameca SPCCS140WI Power Cables Spiking and Cutting Tool

The Fameca SPCCS140WI has been designed with the following functions:

• Spiking cable to check and ensure the absence of voltage on LV and MV underground cables
• Allows safe cutting after spiking operation
• Total security for the user according to NFC 18510

The PICOUP ultra-safe are integrated electrohydraulic cable cutters without hydraulic hose to check the absence of voltage on underground power cables. Use the following cables:

Fameca SPCCS140WI Key Features:

• 2 actions combined into one single tool (spiking and cutting)
• Enables the user to limit any resulting short circuit to a single-phase/ground fault when spiking multi-core cables
  • This causes any protective devices to trip before a 2 or 3 phases fault can be created
• In the event of spiking a live cable, the spiking blade can be replaced easily (minimising cost impact)
• No physical connection between the tool and the user
• Damage to infrastructure is minimised when spiking as a single phase to earth fault is created using a dedicated, local 70mm² copper earthing cable
• Cutting failure sensor
• Indication on the remote to let the user know the cutting operation has come to an end
• Hydraulic over-pressure safety valve
• Battery indicator for charge status
• Start of cutting is prevented if the battery is low
• Cutting capacity: diameter 140 mm
• Metal armour: round wires 4 mm
• Cutting force: 21000 kg
• 24V DC operation
• Autonomy: 20 cuts
• Dimensions L x W x H: 678 x 188 x 320 mm
• Weight: 20 kg

▶ Video: Fameca SPCCS140WI Power Cables Spiking & Cutting Tool:

Hardware diagram of the Fameca SPCCS140WI:

1. Electric connector, with locking cap, positioned on the top of the tool for better protection
2. Dual effect hydraulic selector
3. 3 fixing points
4. Rotating handle: Positioning tool on cable
5. Foldable front handle
6. Function and easy to use remote control Range: up to 150 m