Chauvin Arnoux Qualistar CA 8345 Power Quality Analyser
The most powerful and feature-packed Qualistar yet, offering high measurement accuracy!
Equally well suited for diagnostic fault finding on electrical installations, auditing electricity consumption and validating the quality of electrical supplies. The Qualistar 8345 combines exceptional flexibility with ease of use, extensive communication options and full compliance with IEC 61000-4-30 Class A. The CA 8345 sets new standards for versatility and convenience, and is suitable for use on all types of single- and three-phase systems up to 1,000 V.
Intended for inspection and maintenance teams on industrial or tertiary installations, the Qualistar 8345 snapshots the main electrical network quality features.
The CA 8345 is comfortable to handle and equipped with an intuitive user-interface.
All recorded date is saved on an accessible SD card and transferrable to a PC by means of software, or by duplication on a USB drive connected directly to the unit. The memory card can also be extracted.
▶ Video: An Overview Of The Chauvin Arnoux CA 8345 Power Quality Analyser
Qualistar CA 8345 Key Features:
- 1000V three-phase analyser
- Voltage quality diagnostics and electrical network monitoring
- Measurements on all installation types: three-phase, Aron connection, etc.
- Magnetic hook for easy mounting
- Full compliance with IEC 61000-4-30 Class A
- Harmonics up to the 63rd order including inter-harmonics
- Built-in GPS time/date reference
- Wide 7-inch colour LCD touch-screen
- Remote access with screen mirroring
- SD card and USB port for easy downloading
- Ethernet and Wi-Fi Connectivity
- IP54 casing 55 mm thick with stand
- Recording - Hundreds of parameters stored in memory every 10/12 periods
- Alarms - The parameters are monitored within configurable limits
- Transients - Fast events are captured and their characteristics are stored in memory
- TrueInrush - Studying loads during start up is now much simpler
- Parameterisation with software for EN 50160 reports
- All DC components taken into account
- 2 carrier current frequencies monitored
- Measurement of P, N, Q1, S and D power values (total and per phase)
- Measurement of energy values (total and per phase) with energy valuation
- Internal GPS for precise UTC synchronisation (NTP possible too)
- Real-time display of waveforms (4 voltage and 4 current)
- Waveforms at 512 samples per cycle, with Min/Max 2.5µs
- 5 x 50 Hz/60 Hz AC/DC voltage inputs
- Automatic recognition of different current sensors
- Display of phasor diagrams
- Data in JSON format
▶ Video: Chauvin Arnoux Qualistar CA 8345 Power Quality Analyser:
Qualistar CA 8345 Calculations:
- Calculation of...
- K factor and FHL
- distorting voltages and currents
- displacement Power Factor (DPF) and Power Factor (PF)
- Pst and Plt flicker and the sliding Pst
- unbalance (current and voltage)
- Waveform Inrush with a duration of 10 minutes
- RMS and Peak Inrush for up to 30 minutes
- Capture of hundreds of 2.5 µs transients
- Capture shockwaves up to 12kV with a resolution of 500ns
- Recording of trends
- Trend recording period from 200 ms to 2 hrs
Qualistar CA 8345 Applications:
- Maintenance
- Power factor studies
- Load balancing
- Overheating of the neutral conductor
- Measurements on photovoltaic installations
- Capacitor bank sizing
- Transformer analysis (derating)
- Load start-up measurements
- Failure of switchgear or its components
- Tripping of circuit breakers
- Tripping of differentials
- Flicker monitoring
- Energy efficiency
- Checking power consumption
- Substation metering
- EN50160 certification
What comes with the Qualistar CA 8345?
- Qualistar CA 8345 Power Quality Analyser
- Safety datasheet
- 5 reeling boxes
- Shoulder bag
- USB A/B cable 1.80 m long
- Multilingual Quick Start Guide
- Set of 5 banana leads and crocodile clips
- Set of identification inserts and rings
- Verification certificate
- Removable wrist strap
- Magnetic hook
- SD memory card