Fameca UNITAG Phase Tester for LV Network Applications
UNITAG is a unipolar detector designed to test the presence of phase on insulated or bare LV conductors.
The level of detection is indicated by a LED bargraph and a beeping sound which speed increases as device approaches a live source.
It is commonly used for detecting stray voltage on poles and cross arms, conductor disconnection on overhead insulated LV conductors.
UNITAG will not replace a standard “proving dead” device but is an ideal complement to bipolar LV detector.
Fameca UNITAG Key Features:
- AC system
- AC mains frequency: 50-60 Hz
- Field of use: from 50V up to 1000V
- Detection by direct contact at 50V
- CAT IV 1000V rated
- IP65 rated
- Temperature: - 15 ° C to +45 ° C
- 2 x LR03 1.5 volt alkaline (AAA)
- Delivered with soft bag suitable for belt fixing
- Sound and light alert on voltage presence
- UNITAG 1000V for using on networks
- Can be used by hands or on insulating stick
- Indication of detection level
- Tip length designed for access to LV panel and test point
- Audible beeping speed proportional to the level of detection
- Visual indication of level of detection on a bright LED bar graph
- Automatic self-test when switched on with green LED indication
- Multi purpose detector: street light, insulating twisted cables, rescue team, fire fighters...
What comes with the Fameca UNITAG?
(UNITAGUFX) - UNITAG Phase Tester for LV Network
- Hand held and stick interface
- Telescopic stick