Druck DPI 705 E Pressure & Temperature Indicator (Commercial)
The Druck DPI 705E is perfect for routine maintenance and system troubleshooting. A handheld pressure and optional temperature indicator built with essential features for accurate and reliable measurements.
Druck DPI 705 E Key Features:
- Combine tough and rugged design
- Designed for single handed operation
- Power on and use; no warm up time required!
- 1, 3 or 5 minute leak test
- Large digit high-contrast LCD with backlight
- Complete with integral desk stand and hanger
- 3 Levels of accuracy
- 41 pressure ranges from ±25 mbar to 1,400 bar (±10 inH20 to 20,000 psi/2.5 kPa to 140 MPa)
- Total 1 year uncertainty down to 0.025% full scale (FS) over temperature range of -10°C to +50°C
- Integral calibration record with calibration due count-down display
- Leak test, tare, maximum/minimum and filter functions
- Optional remote plug and play pressure (PM700E) and Resistance Temperature Detector (RTD-PROBE) sensors
- Compatible with our pneumatic and hydraulic hand pumps
- Impact resistant, sealed to IP54
- Optional carrying case with belt loop
- Optional magnetic/loop hanging strap
- Long battery life
- Hazardous Area (Intrinsically Safe) version available - see drop down
Druck DPI 705 E Special Features:
20 pressure measurement units available: mbar, bar, Pa, kPa, hPa, MPa, psi , lb/ft2, kgf/cm2, kgf/m2, mmHg(0°C), mHg(0°C), inHg 0, mmH2O, cmH2O, mH2O, inH2O (4°C, 20°C), ftH2O (4°C, 20°C)
Leak test: Used to determine if there is a leak in the system by recording the pressure change over a fixed time. Leak test can also be used with the RTD sensor to record a temperature change over time. User defined 1, 3 or 5 minute leak test with live countdown timer
Zero: Zero pressure correction (gauge/differential sensors)
Tare: 0 to 100% FS temporary zero offset capability by subtracting the current reading from subsequent measurements.
Filter: Enables a filtered pressure reading by showing a rolling average of the last 10 measurements. Providing a more stable reading in a noisy measurement.
Alarm: User adjustable high and low pressure alarms with visual (Bell Icon, Pressure Reading and Backlight flash) and audible warning for 60 seconds.
Calibration: Used in conjunction with the optional pneumatic or hydraulic hand pumps, the DPI 705E Series provides a simple, low-cost calibration solution.
Battery: Ultra power efficient design, can be used for 8 Hours per day, 6 days per week for up to a year using a single set of batteries.
Display: 16mm digital height LCD with ±99999 readout
Druck DPI 705 E Handheld Pressure Indicator Options:
- Commercial
- Intrinsically Safe
Druck DPI 705 E Accuracy level options:
| Standard: | | ±0.1% FS Total accuracy over -10 to 50 degrees C including NLH&R, 1 year drift and calibration uncertainty |
| High: | | ±0.05% FS Total accuracy over -10 to 50 degrees C including NLH&R, 1 year drift and calibration uncertainty |
| Premium: | | ±0.025% FS Total accuracy over -10 to 50 degrees C including NLH&R, 1 year drift and calibration uncertainty |
Druck DPI 705 E IS Version Hazardous area approvals:
- ATEX, IECEx, UKEX, CSA, CCOE, XPL, KCs, NEPSI, ECASEx (Ordering code ‘H1‘)
- INMETRO (Ordering code ‘H2‘)
- ATEX, IECEx, UKEX, CCOE, XPL, KCs, NEPSI, ECASEx, INMETRO: Ex ia IIC T4 Ga (–10°C ≤ Ta ≤ +50°C)
- CSA approved (Canada & US): Class I, Zone 0, AEx/Ex ia IIC T4 Ga (–10°C ≤ Ta ≤ +50°C)