FLIR TA93 Hold & Snapshot Remote Control
Hold a reading. Capture an image. Keep control close to hand.
The FLIR TA93 Hold & Snapshot Remote Control puts two useful meter functions within easy reach. Clip it to a test lead to hold a displayed reading or capture an image without reaching for the meter.
Designed for select FLIR digital multimeters, including the FLIR DM266, the TA93 provides wireless control at distances up to 1 m.
Request a FLIR TA93 quote today. Tell us your meter model and required quantity.
FLIR TA93 Key Features:
- Display Hold button: freeze or unfreeze the reading shown on your paired meter
- Snapshot button: trigger image capture on your paired meter
- Built-in probe holder: clips onto a test lead to keep the controls close by
- Wireless RF connection: operates at 433.92 MHz with a maximum range of 1 m
- Status LED: flashes after each button press
- Compact, lightweight design: weighs 10 g and uses a replaceable CR1220 battery
Why choose the FLIR TA93 Hold & Snapshot Remote Control?
Make it easier to record findings while managing your test leads. With Hold and Snapshot controls beside the lead, the TA93 helps you keep your attention on the inspection and freeze the display or capture an image at the right moment.
What Comes with the FLIR TA93?
- FLIR TA93 Hold & Snapshot Remote Control with built-in probe holder
For use with a compatible FLIR digital multimeter.
| Features | |
| Button functions | Snapshot and Display Hold |
| Meter compatibility | Select FLIR digital multimeters, including the DM266 |
| Communication | Wireless RF |
| Radio frequency | 433.92 MHz |
| Maximum operating distance | 1 m |
| Mounting | Clips onto a multimeter test lead |
| Power | 1 × CR1220 3 V coin battery |
| Status LED | ✓ flashes after each button press |
| Operating conditions: -10 to +30 °C | <85 % RH |
| Operating conditions: +30 to +40 °C | <75 % RH |
| Operating conditions: +40 to +50 °C | <45 % RH |
| Storage conditions | -20 to +60 °C at <80 % RH |
| Dimensions (L × W × H) | 42.7 × 21 × 24.9 mm |
| Weight | 10 g |
| Warranty | 3-year limited warranty |
❓ Frequently Asked Questions (FAQ)
Q1: Does the TA93 work with every FLIR multimeter?
A. No. It supports selected FLIR digital multimeters, including the DM266. Check your meter’s documentation for compatibility before ordering.
Q2: Does the remote need pairing before use?
A. Yes. Pair the TA93 with your meter before using its buttons. On the DM266, pairing is accessed through Settings, Device Settings, then Remote Control.
Q3: Can I replace the battery?
A. Yes. The TA93 uses one CR1220 3 V coin battery. Replace it when the status LED no longer lights as you press either button.
Request a Quote for the FLIR TA93
Add convenient remote control to your meter set-up. Send us your meter model, required quantity and inspection needs so we can help you assess suitability.
Enquire today for your FLIR TA93 quotation.