Martindale TEK100 Non-Contact AC Voltage Detector (Volt Stick)
The TEK100 is suitable for detecting 100V to 600V AC without requiring physical contact with the conductor.
The presence of any voltage between 100V and 600V AC will generate an audible tone, together with a red visual indication.
The integral self test activates the sensor in the tip of the tester at 50Hz as well as checking the battery and LED. The entire circuit, not just the indicator LED, is therefore tested.
This proves that the unit is fully functional and avoids the need for a separate proving unit.
The only non-contact detectors with a built-in proving device that really proves the entire circuit.
Martindale TEK100 Key Features:
- 100V to 600V AC voltage range
- 45Hz to 1kHz frequency range
- Temperature -5°C to 40°C
- Integrated self-test
- Visual and audible indication
- AC Voltage present: red LED and audible tone
- Battery OK: green LED
- Supplied with 9V alkaline battery, MN1604 or equivalent
- Sensitivity:
| Cable Type | at 115V | at 230V |
| Flat 1mm2 twin and earth | 3mm | 23mm |
| Flat 2.5mm2 twin and earth | 5mm | 23mm |
| Round 1.5mm2 | 2mm | 18mm |
▶ Video: Demonstrating the Martindale TEK100, TEK101, TEK200 & VT7:
