Metrel A 1600 CE Switch 5kV
Bring automatic channel switching to your electrical safety test station.
Expand your Metrel CE MultiTester setup with the Metrel A 1600 CE Switch 5kV. This active switching accessory provides four high-voltage test channels and two 4-wire continuity channels, helping you test electrical equipment with multiple connection points through a controlled, automated sequence.
Designed for operation under the connected master instrument, the A 1600 handles channel switching as part of configured AutoSequences®. It supports high-voltage testing up to 5 kV AC or 6 kV DC, alongside continuity, insulation resistance, leakage and other supported measurements. Desktop and 19-inch rack installation options make it suitable for production test benches and integrated test stations.
Request a quote for the Metrel A 1600 today. Tell us your CE MultiTester model and testing requirements so your enquiry covers the right configuration for your application.
Metrel A 1600 CE Switch 5kV Key Features:
- Four high-voltage channels: Extend the connected tester’s high-voltage test connections for equipment with multiple test points
- Two 4-wire continuity channels: Support continuity measurements with a maximum measuring current of 25 A
- High-voltage test support: Route supported tests up to 5 kV AC or 6 kV DC from the compatible master instrument
- Automatic sequence control: The master instrument controls internal switching during configured AutoSequences®, reducing manual intervention during testing
- Multiple measurement functions: Support continuity, insulation resistance, power, leakage, high-voltage and discharge-time measurements, subject to the connected tester’s capabilities
- Integrated test-station I/O: Four control inputs, eight relay outputs and LED status indication support automated test sequences
- Adapter recognition: Hardware and software protection help prevent excessive voltage or current being applied to a recognised connected adapter
- Flexible installation: Use the unit on a desktop or integrate it into a standard 19-inch rack
✓ Why Choose the Metrel A 1600?
When electrical equipment has several connection points, controlled switching helps make repeated testing more consistent. The A 1600 allows configured sequences to select the required channels while keeping test operation under the master instrument’s control. For end-of-line production testing, it provides a practical way to extend a compatible CE MultiTester setup and reduce manual switching steps.
What Comes with the Metrel A 1600 Switch Standard Set?
- Metrel A 1600 CE Switch 5kV
- 1 x A 1728 Power Cable, 2 m, 3 × 0.75 mm²
- 1 x A 1695 Ground Cable, Yellow/Green, 2 m, 2.5 mm²
- 2 x A 1076 Test Cables, Black/Red, 2.5 m, 2.5 mm²/0.75 mm²
- 1 x A 1645 XA Multifunctional Test Cable, 1.5 m, for MI 3394
- 1 x A 1601 High-Voltage Test Lead, Red, 1.5 m, 5 kV
- 1 x A 1602 High-Voltage Test Lead, Blue, 1.5 m, 5 kV
- Instruction Manual
Specifications
| Features | |
| Switching and Test Capabilities |
| High-voltage test channels | 4 |
| Continuity test channels | 2, with 4-wire connections |
| Supported high-voltage testing | Up to 5 kV AC or 6 kV DC with a compatible master instrument |
| Maximum continuity measuring current | 25 A |
| Maximum insulation resistance measuring voltage | 1,000 V |
| Supported measurements | Continuity, insulation resistance, power, substitute leakage, differential leakage, protective conductor leakage, touch leakage, leakage and power, AC/DC high-voltage tests, programmable AC/DC high-voltage tests and discharge time |
| Automatic sequence operation | ✓ Controlled by the master instrument |
| External control inputs | 4 DB9 input connectors |
| General relay outputs | 8 DB9 output connectors |
| Maximum continuous load current | 16 A at power factor 1 |
| Power, Installation and Physical Specifications |
| Mains supply | 115 V / 230 V AC, 50 Hz / 60 Hz |
| Supply voltage tolerance | ±10% |
| Maximum power consumption | 20 VA |
| Mains supply overvoltage category | CAT II / 300 V |
| Protection class | Class I, mains supplied |
| Installation | Desktop or standard 19-inch rack |
| Dimensions, W × H × D | 500 × 230 × 450 mm |
| Weight | 8.3 kg |
| Ingress protection | IP20 |
| Operating temperature | 0 to +40°C |
| Maximum operating humidity | 85% RH, non-condensing |
| Storage temperature | -10 to +60°C |
| Maximum operating altitude | 2,000 m |
❓ Frequently Asked Questions (FAQ)
Q1: Does the Metrel A 1600 require a separate tester?
A. Yes. The A 1600 operates as a controlled switching extension for a compatible Metrel CE MultiTester. The CE MultiTesterXS controls the measurements and internal channel switching during configured test sequences.
Q2: How many test channels does the A 1600 provide?
A. It provides four high-voltage test channels and two 4-wire continuity channels, supporting electrical safety testing across multiple connection points.
Q3: What high-voltage tests does the CE Switch 5kV support?
A. The A 1600 supports testing up to 5 kV AC or 6 kV DC through a compatible master instrument. Its supported functions include both standard and programmable AC/DC high-voltage tests.
Q4: Can the Metrel A 1600 be installed in a rack?
A. Yes. It can be used as a desktop unit or installed in a standard 19-inch rack, providing flexibility for test benches and integrated production test stations.
Ready to extend your automated electrical safety testing? Request your Metrel A 1600 CE Switch 5kV quotation with your master instrument model, required test functions and installation requirements.