PM3000HF 3-Phase Power Quality, Harmonics and Flicker Monitor
The Outram PM3000HF measures almost every aspect of the electricity you’re supplying or receiving for example:
- The generation/distribution and transmission of electricity or gas
- General electrical contractors
- On-site electrical contractors and engineering/construction companies
- Industrial plants
- Government, municipal buildings or organisations
- Energy management or energy consulting companies
Generally you will power the logger off the mains electricity when you‘re utilising the unit. You will feel completely confident about the integrity of your recorded information should the power go down. The logger will carry on recording for a further ten minutes after which it will shut down all processes to battery power, conserving your data, for two months at least.
Built for your working environment: Clip the voltage sensor roll on the front of the bag, hang the bag round your neck for hands-free usage
Outram PM3000HF Key Features:
- Small, light and easy to carry
- Graphical touchscreen interface provides straightforward, user-friendly operation
- Purposely constructed leads pouch to hold your complete set of leads, within the bag
- Very thorough safety tests and fused voltage sensors
- Flexible Rogowski coils are much easier to fasten round conductors
- Created professional graphs and reports
- Comes complete with a help section within the logger menu (available wherever you are in the menu structure)
- Just touch the screen twice anywhere to start up the logger
- Easy to use backlit touchscreen complete with plastic pointer pencil (supplied with the unit)
- ‘Hook-Up Checklist‘ with photos and reference vector diagrams to give confidence of correct hook-up whether 1st or 101st time of using the unit
- Supplied with Pronto for Windows software, one of the most highly regarded data recovery and analysis packages available
- 3 memory options: 8MB (Standard), 16MB, and 32MB - You will now be able to record down to single cycle detail for up to 2 months at a time
Outram PM3000HF Record & Measure With Confidence:
- 23 pre-stored factory configurations allow you to get started straight out of the bag
- Patented Single Cycle Adaptive Storage recording process - provides extremely high resolution over long recording periods
- Measures current between 0 and 3,000 Amps and voltage between 0 and 480 Volts on single phase, two phase and three phase power supplies
- Flicker measurements to IEC61000-4-15 (Optional): Instantaneous Flicker Sensation, Short Term and Long Term Flicker Perceptibility
- Records and displays up to 16 channels of voltage, current, power, power factor, VARs, phase angle, frequency, THD, and much more
- Comprehensive range of math functions give excellent data analysis
Outram PM3000HF Applications:
- Troubleshoot unknown power quality issues
- The unique recording regime Adaptive Store is especially useful for helping to locate, detect, and prevent problems on your network, recording down to a single cycle; the instant events occur without setting any thresholds
- Unique precise capturing of sudden changes
- Transients, current spikes, harmonics, drop-outs and brown-outs (to extremely high resolution) making identifying problems on your power distribution system easier and quicker, saving you time and money
- Voltage and flicker complaints
- Solve customer complaints including voltage or flicker problems using the ability to compare any data streams on the same graph in the Outram/Ranger Software Pronto. For example RMS voltage and instantaneous flicker sensation (and any others) on the same graph
- Find the problem quickly using Adaptive Store recording regime for minimum customer disruption
- Energy assessments
- Load studies – Verify electrical system capacity before adding extra load
- New equipment installation – Benchmark before and check after the installation of new equipment to ensure quality of service has been maintained
- Long-term monitoring – Discover solutions to hard-to-find or intermittent problems. Record indefinitely in FIFO mode until the event occurs again. If required transfer data via WiFi/3G/4G using our PMGateway App
- Measure in remote locations – PM3000 is powered from the voltage being measured or via a 12V charger. If the power goes down, the PM3000 has a 10 minute ride through then turns itself off. It then starts up again automatically when the power returns so you don’t miss anything
- Preventive Maintenance – Keep a track on your power quality to detect any problems before they cause your equipment damage or end up in costly down time
- Network Characterisation – Measure non-sinusoidal and unbalanced systems
- Power Quality Software - Outram comprehensive and very flexible Pronto software is the same for all Outram/Ranger equipment making - You don‘t have to learn different packages
DC measurement upgrade is available: Contact us to see if your existing PM3000HF can be fitted with a DC Measurement or Extra Memory Upgrade
Outram PM3000HF Standards:
IEC 61010, 600V Cat. III, Pollution level 2, CE, IEC 61326(EMC), IEC 61000-4-15