VIP 200 is a 2 pole voltage indicator with continuity, phase rotation and single pole test facility.
Auto Test - The VIP 200 features an Auto Test button to ensure the batteries are in good condition.
Two Pole Voltage Indication - Two pole voltage indication is possible with and without batteries installed. AC/DC selection is automatic.
Single Pole Voltage Test - Batteries must be installed and in good condition. Will detect AC voltages from 100VAC. This value may be impaired under certain conditions e.g use of PPE.
Continuity Testing - The units LED will illuminate and an audible tone will sound if continuity is present.
Phase rotation - Phase rotation can only be determined within a three phase system. Voltage between phases is indicated.
- 12 , 24, 36, 50, 120, 230, 400, 600V AC/DC indication
- Audible continuity test
- Phase rotation
- Conforms to GS38 tip standards
- Bright LED torch
Over voltage Category
LED Indication: 12, 24, 36, 50,120, 230, 400, 600V
LED Resolution: 12, 24, 36, 50,120, 230, 400, 600V
Voltage Detection (ACV / DCV): Automatic
Polarity Detection (DCV): Full Range
Range Detection: Automatic
Response Time: Frequency Range: 0 - 400 Hz
Peak Current: 1s Operation Time: ED = 30sRecovery Time: 10 mins
Auto Power On: < 12V
Operating Conditions: -10ºC to 55ºC, 85% RH
LED Indication: 50 - 110 - 230 - 400V
Batteries: 2 x AAA (LR03)
Dimensions (mm): 300 x 68 x 38Weight: 218g
Prods: GS38 compliant
IP Rating: IP54
Safety Compliance: IEC 61249-3, 61010-1
Interconnecting Cable: Silicone rubber, dual insulated.