Franklin Electric CA093 Probe Set Replacement
For use with the following Celltron Advantage Kits:
Originally under the branding Midtronics Battery Testers
Franklin Electric CA093 Probe Set Replacement (Celltron)
The Franklin Electric CA093 Probe Set Replacement (Celltron) is an official Franklin Electric part made to keep CELLTRON handheld battery testers working at their best. Over time, probes can wear out from regular use, rough handling, or exposure to harsh environments. When that happens, your tester may give less accurate results or be harder to use. The CA093 is a direct factory replacement, bringing your tester back to the same accuracy, safety, and performance it had when new.
Franklin Electric CA093 Key Features:
Accurate Testing You Can Trust
The CA093 probes are built for reliable contact with all kinds of battery terminals. The tips are made from high-quality conductive materials that make sure the signal is clean and steady. This means your voltage, resistance, and conductance readings will be correct and repeatable. Good contact is important for battery maintenance work because even a small change in readings can affect your decision to replace or keep a battery.
Comfortable and Safe to Use
Franklin Electric designed the CA093 Probe Set to be comfortable for technicians who test batteries for long hours. The grips are shaped to fit the hand well, reducing strain and making it easier to hold steady during testing. They are also insulated to help protect you from electrical contact. Whether you are doing a quick check or testing a full battery bank, the CA093 is built to make the job safer and easier.
Strong Enough for the Field
Battery maintenance often means working in places like outdoor telecom sites, busy utility substations, or rail yards. These places can be tough on tools. The CA093 probes are made to last in these conditions. The cables are reinforced so they can handle bending, pulling, and twisting without breaking. The housings are strong enough to resist impacts and protect the tips from damage.
Quick and Simple to Replace
If your old probes are damaged or worn, the CA093 Probe Set can be swapped in quickly without special tools. This means you can get your tester back in action fast and keep your work on schedule. Many technicians keep a spare set in their kit so they can replace probes on the spot if needed.
Works with Many CELLTRON Models
The CA093 is made to fit a wide range of CELLTRON handheld testers. This is helpful if your team uses different models, because you can stock one type of replacement probe that works with all of them. Using genuine Franklin Electric parts also helps keep your tester under warranty and ensures it meets factory performance standards.
Used in Many Industries
- Data centres - for UPS battery checks to protect IT equipment.
- Utilities - to maintain batteries in substations and switchgear.
- Telecom - to make sure backup batteries at cell sites are ready.
- Industrial facilities – to check backup batteries for safety and uptime.
- Rail and transport – to test batteries for signalling and other systems.
Why Replacing Probes Matters
Old or damaged probes can affect how well your tester works. They can cause unstable readings, make contact harder, or even create safety risks. Replacing them with the CA093 keeps your tester accurate and reliable. This helps you make better maintenance decisions, avoid replacing good batteries, and keep critical systems running without surprise failures.
The Value of Genuine Parts
It can be tempting to use cheaper replacement probes, but they may not meet the same quality standards as Franklin Electric parts. The CA093 is tested and approved to work perfectly with CELLTRON testers, giving you peace of mind that you are getting the most accurate results possible.
Meeting Industry Standards
In industries like utilities, telecom, and data centres, accurate battery testing is often required to meet regulations or safety standards. Whether you are working to IEEE, NERC, or other industry rules, using the CA093 helps ensure your results are trusted and compliant.
Key Benefits of the CA093 Probe Set
- Fast replacement to reduce downtime
- Insulated grips for better safety
- Comfortable design for long testing sessions
- Tough build for field work
- Accurate contact for stable readings
The Takeaway
The Franklin Electric CA093 Probe Set Replacement (Celltron) is more than just a spare part—it is a vital tool for keeping your CELLTRON tester working the way it should. With strong, comfortable, and accurate probes, it helps you work safely, test faster, and get results you can trust. Whether you are in a data centre, at a telecom tower, or on a rail line, the CA093 ensures your battery testing gear is ready for the job every time.