FLUKE 1664 FC Multifunction Tester & FEV300 EV Charging Test Adapter Kit
This kit equips you to test charging stations in accordance with IEC/EN 61851-1 and IEC/HD 60364-7-722. It is designed to test function and safety of charging stations mode 3 for AC charging. The adapter imitates an electric vehicle and opens up a charging cycle (activating voltage/current output), allowing you to conduct tests in combination with the FLUKE 1664 FC Multifunction Tester.
FLUKE 1664 FC:
The addition of the FLUKE 1664 FC to this kit allows safety measurements via the measuring terminals:
- Earth bond
- Insulation
- Loop/line impedance
- RCD trip test
The FLUKE 1664 FC Multifunction Tester Other Key Features:
- Insulation-PreTest safety function
- Insulation at L-N, L-PE, N-PE inputs
- Auto Test sequence
- Loop and line resistance—mΩ resolution
- Continuity at L-N, L-PE, N-PE inputs
- Test smooth dc sensitive RCDs (Type B/B+)
- Earth resistance
- Voltage True-rms (ac and dc) and frequency
- Wiring polarity checker, detects broken PE and N wires
- Insulation resistance
- Continuity and resistance
- Measure motor windings with continuity test (@ 10 mA)
- Loop and line resistance
- Prospective Earth Fault Current (PEFC/IK)
- Prospective Short-Circuit Current (PSC/IK)
- RCD trip time
- RCD trip current (ramp test)
- Measures trip time and current for RCD type A and AC in one test
- RCD variable test current
- Automatic RCD test sequence
- Phase sequence test
- Z Max Memory
- Memory
- IR-USB and BLE interface (when used with optional FLUKE DMS and FVF software)
To read more about the FLUKE 1664 FC CLICK HERE.
FLUKE FEV300:
- Suitable to vehicle charging stations with charging mode 3
- Fits to charging stations with EV socket-outlet type 2 and EV-connectors for type 2 and type 1
- PE Pre-Test: With this safety feature the PE conductor will be tested for possible presence of dangerous voltage against earth
- Proximity Pilot (PP) state “Cable Simulation”: With PP State rotary switch the adapter can simulate various current capabilities of charging cables
- Control Pilot (CP) state “Vehicle Simulation”: With CP State rotary switch selector all charging states can be simulated
- Separate phase indication by three LED lamps for easy check if voltage is present at the charging output
- Measuring terminals L1, L2, L3, N and PE to connect test device like installation tester to perform safety and functional tests
- Compatibility: Integrates into Fluke portfolio of test and measurement tools, by allowing direct connection through FEV measurement terminals
- Simulation of CP error state “E”
- Simulation of PE error state “F” (Earth fault)
- Terminals for CP signal output to check communication between adapter (simulated electrical vehicle) and charging
- station. This can be measured by a ScopeMeter or multimeter
- The voltage level defines the charging modes and the duty cycle of this PWM (Pulse Width Modulation) signal defines the maximum allowable charging current
- IP 54 rating - Dust and splashing water protected
To read more about the FLUKE 1664 FC CLICK HERE.
What comes with the FLUKE FLK-FEV300/KIT UK?
- FLUKE 1664FC Multifunction Tester
- 6x AA (IEC LR6) Cell Batteries
- Zero Adapter
- Heavy Duty Mains Cord
- Standard Test Lead Set
- TP165X Remote Control Probe and Lead
- Padded Carrying and Waist Strap
- C1600 Hard Carrying Case
- Quick Reference Guide
- FEV300 EV Charging Test Adapter
- FEV300-CON-TY2 Type-2 Plug
- Soft Carrying Bag