FLUKE ii1050 Acoustic Imager
Spot leaks and faults. Plan repairs with confidence.
The FLUKE ii1050 Acoustic Imager makes leak detection easier for maintenance teams. It locates compressed air leaks, gas leaks and vacuum leaks. It also helps detect partial discharge and early signs of mechanical faults.
See where sound comes from, even in noisy plants. Use its analysis tools to estimate leak costs, assess findings and create reports on the device.
Request a FLUKE ii1050 quote today. Tell us what you need to inspect.
From tracking down compressed air leaks that drain your budget...
...to revealing partial discharge before it becomes costly downtime.
FLUKE ii1050 Acoustic Imager Key Features:
- SoundSight™ imaging: 202 microphones show sound sources on a camera image
- LeakQ™: estimate leak rate and energy cost
- PDQ Mode™: locate and assess partial discharge
- MecQ™: check for bearing defects, friction and turbulence
- Clear view: 7-inch touchscreen, 13 MP camera and 3× digital zoom
- Simple reporting: add notes, asset details and repair priorities
- Air-tightness checks: Beacon Mode works with the optional FLUKE SB140 SoundBeacon™
- Portable design: IP54 protection and a weight of 1.2 kg with battery
Why choose the FLUKE ii1050 Acoustic Imager?
Check compressed air, gas and vacuum systems with one tool. Inspect switchgear, transformers, bearings, motors, pumps and fans.
Use leak cost estimates to choose which repairs to tackle first. Plan work early to help reduce unplanned downtime. Save notes and asset details to guide your team.
| Features | |
| Microphone array | 202 digital MEMS microphones |
| Frequency band | 2 kHz to 100 kHz |
| Detection range | 0.5 m to more than 150 m, depending on ambient conditions |
| Typical field of view | 64° × 48° for the acoustic sensor and visible-light camera |
| Nominal frame rate | 25 frames per second |
| Visible-light camera | 13 MP; focus from 50 cm to infinity |
| Digital zoom | 3× |
| Display | 7-inch anti-glare, sunlight-readable LCD with backlight and capacitive touchscreen |
| Display resolution | 1280 × 800 pixels |
| Acoustic image | SoundMap™ overlay on the visible-light image |
| LeakQ™ Mode | Leak size scale from 1 to 10, with leak rate and cost estimation |
| PDQ Mode™ | ✓ partial-discharge source identification and probability estimation |
| PRPD display | ✓ real-time phase-resolved partial-discharge patterns |
| MecQ™ Mode | ✓ mechanical inspection for indicators of bearing defects, friction and turbulence |
| Beacon Mode | ✓ requires the optional FLUKE SB140 SoundBeacon™ |
| Thermal imaging support | ✓ requires the optional FLUKE TC03A iSee™ Thermal Camera Attachment |
| Storage capacity | 128 GB |
| Image capture | JPG with blended visible-light and SoundMap™ images |
| Video capture | MP4 with blended visible-light and SoundMap™ images; up to 5 minutes per video |
| Reporting on the instrument | ✓ |
| Inspection annotations | Asset details, text notes, action priorities and up to 4 photo notes |
| Asset identification | Text entry and automatic QR code identification |
| Connectivity | Wi-Fi and 2 × USB-C ports |
| Battery type | Rechargeable, field-replaceable lithium-ion; 2 battery packs supplied |
| Battery life | More than 3.5 hours per battery; more than 7 hours across the 2 supplied batteries |
| Charging | Internal USB-C charging; less than 3 hours |
| Protection rating | IP54 |
| Dimensions (H × W × L) | 235 × 154 × 46 mm |
| Weight | 1.2 kg including battery |
| Operating temperature | -10 to +45 °C |
| Storage temperature | -20 to +70 °C, with batteries removed |
| Relative humidity | 10 to 95 %RH, non-condensing |
| Operating altitude | Up to 2,000 m |
| Tripod connection | 1/4-inch-20 UNC thread |
| Microphone array health check | ✓ self-diagnostic notification when the array needs attention |
| Warranty | 2 years |
What Comes with the FLUKE ii1050 Acoustic Imager?
- FLUKE ii1050 Acoustic Imager
- Hard carry case
- Hand and neck straps
- 2 × RRC2040 rechargeable battery packs
- 65 W charger, USB-C cable and country-specific connectors
The FLUKE TC03A thermal attachment and SB140 SoundBeacon™ are optional extras.
FLUKE ii1050 Kit Bundle Options
Expand your inspection capabilities with a thermal camera kit, or choose a package with SoundBeacon™. All options include the standard ii1050 package, plus the extras below.
All kits include the standard ii1050 package, plus the additional accessories shown below.
| Additional accessories | FLK-II1050/T9HZ | FLK-II1050/T50HZ | FLK-II1050/9H/SB140 | FLK-II1050/50H/SB140 |
| TC03A thermal camera | 9 Hz | 50 Hz | 9 Hz | 50 Hz |
| TP01 II-Series tripod | ✓ Included in all kits |
| SB140 SoundBeacon™ (40 kHz) | — | ✓ |
❓ Frequently Asked Questions (FAQ)
Q1: Does it include thermal imaging?
A. Thermal imaging needs the optional FLUKE TC03A iSee™ attachment. It is also available in selected ii1050 bundles.
Q2: What do I need for air-tightness tests?
A. Use Beacon Mode with the optional FLUKE SB140 SoundBeacon™ transmitter to check for sealing defects.
Q3: How long do the batteries last?
A. Each battery lasts more than 3.5 hours. The two supplied packs provide more than 7 hours in total.
Request a Quote for the FLUKE ii1050 Acoustic Imager
Tell us what you need to inspect, how many units you need and which accessories you want.
Enquire today for your FLUKE ii1050 Acoustic Imager quote.