Be the first to review this product

Socket & See
TB118 Advanced Kit; Safe isolation Gas Engineer’s Electrical Test Kit


Socket & See TB118 Advanced Kit contain all the equipment a gas engineer needs to safely comply with Technical Bulletin 118 (safe electrical isolation of gas appliances), this kit contains the DLM PRO.

Part Number:
TB118 ADVANCED KIT

read more

 

Acutest's Price Promise

Manufacturer's RRP

£599.95
719.94 incl. VAT)
Add To Cart

 

 

 

Socket & See TB118 Advanced Kit - The Gas Engineer‘s Electrical Safe isolation Kit

The most complete solution for gas engineers complying with TB118 (Technical Bulletin 118 – The safe isolation of gas appliances).

Every piece of this kit has been specifically chosen to address each part of TB118. The complete kit comprises of 8 parts, including the uniquely engineered Socket & See DLM PRO.

 

TB118 Check Power Supply Earthing With DLM PRO

The DLM PRO can carry out the required earth loop impedance test, without tripping the installation’s RCD.  A loop impedance test can also be carried out at a fused spur prior to installation, as well as at a mains socket with the included SS130 socket interface adaptor.

The DLM PRO also includes basic multimeter functions to aid fault finding down to component level.  The simplicity of this unit is very much favoured by gas engineers, compared to other units.  Simply turn the dial to the required function to begin the test, there are no buttons to press.  Furthermore, functions and terminals are colour coloured for easy operation.

 

TB118 Safe To Touch Test

Before servicing is carried out on a boiler, a sweep of the casing and any extraneous metal work should be carried out with non-contact voltage indicator to check for any hazardous voltages.

The Socket & See VVD PRO non-contact voltage detector strikes at 50v, and thanks to its CAT IV safety rating, is safe for voltage detection up to 1000V.

Feedback from the VVD PRO is provided both visually (red flashing tip) and physically by vibration.

 

TB118 Safe Isolation With Lock Out Tag Out

Supplied in the Advanced Kit are three lock off devices, allowing safe isolation in almost any environment:

(Each lock out device includes two warning tags which include space for the engineer’s details)

 

The purpose of a lock out device is to prevent the circuit the engineer is working on from becoming accidently reenergised, for example by a customer or colleague. Each lock out device includes two warning tags with space for the engineers name and contact information.

TB118 Safe Isolation: PROVE – CHECK – PROVE AGAIN

Many are familiar with two pole voltage indicators as a safe and affordable way to check if an appliance is electrically dead.  The Socket & See VIP150 voltage indicator is included with the TB118 Advanced Kit.

The VIP150 is simple to use and small enough to access tight spaces and terminal blocks.  There are no batteries or buttons to press.  Indication of volts present is indicated by bright red LED.

IMPORTANT: Check the correct operation of the VIP150 both before and after checking for voltage at the appliance terminals. 

PROVE – CHECK – PROVE AGAIN

The use of a ‘known source’ such as the SP400 proving unit is very important. Having a dedicated known source that is easily accessible saves time and encourages best practices.

 

 

What comes with the TB118 Advanced Kit?

 

Comparison Chart for: Socket & See TB118 Advanced Kit; Safe isolation Gas Engineer’s Electrical Test Kit

400+500+600+
General Features
Battery & mains powered
Colour screen & QWERTY keypad
Large Internal memoryUp to 2,000 recordsUp to 10,000 recordsUp to 50,000 records and 2,000 photos
Bluetooth scanner & printer compatible
Password controlled user accpunts
Set up multiple user accounts with varying levels of privileges
Clone facility to set up multiple testers
Checkbox supplied as standard
Test Inspection Features
Auto increment asset ID
PAT setup option to allow for custom
Enter asset description after test using keypad or barcode scanner
Comprehensive electrical safety test features
Point to point measurement (Rpe & IR)Optional accessory required
User configurable electrical test/visual inspection seqeunces25100100
User set sites & locations50100100
Risk based retest period calcuator
User definable comments lines against test records44
Configurable checklists for any workplace test or inspection
On-board camera
Universal risk assessment
Health & safety certificates
Data transfer
1D and 2D scanner connectivityReads 1D data only
Read QR code (2D) labels with 2D scanner
RFID reader connectivity
Print Pass & Fail labels with 1D barcode
Print Pass & Fail Labels with QR code (2D)
Add your company logo to labels (on large 1D labels only)
Select from various label formats to print666
Download to PC via USB cable
Data Transfer via USB flash drive
Filter results to be downloaded
Upload previous results to tester for retest

 

 

 

ONLY REGISTERED USERS CAN WRITE REVIEWS. PLEASE SIGN IN OR CREATE AN ACCOUNT