Fluke
789 ProcessMeter™ with ir3000


The Fluke 789 with ir3000 gives you to access all the features of Fluke Connect.

Part Number:
Fluke 789/IR3000FC

read more

 



List Price:

£1067.00
1280.40 incl. VAT)
Add To Cart

 

 

ir3000 FC Connector

Fluke Connect ir3000 FC Connector allows you to wirelessly transfer data from your existing Fluke Tools to your smart phone.

  • Fits over the IR port of your existing Fluke Tools
  • Upgradeable by USB
  • Immediately enables you to graph, save and share the tool's reading with your team from your smart phone

789 ProcessMeter

Double Your Power

The Fluke 787 was the first tool to combine a DMM and a loop calibrator to give process technicians double the power in one tool. Now it’s even better, the range is extended with the new Fluke 789 – the ultimate loop calibration multimeter. The Fluke 789 has a 24-Volt loop supply reducing the need for taking a separate power supply when doing offline transmitter testing. And with its built-in, selectable 250-Ohm Hart® resistor, it also eliminates the need to carry a separate resistor with you. Now process technicians can do a lot more while carrying a lot less.

Features of the Fluke 789

  • 24 V Loop power supply
  • Very large dual display
  • Enhanced backlight with 2 brightness settings
  • 1200 Ohm drive capability on mA source
  • HART mode setting with loop power and a built-in 250 ohm resistor
  • 0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check
  • Externally accessible fuses for easy replacement
  • Infrared-port to process data in FlukeView Forms (V2.1) software



Fluke 789 features that are also included in the Fluke 787

  • Precision 1000 V, 440 mA True-RMS digital Multimeter
  • 0.1% dc voltage accuracy
  • 0.05% dc current accuracy
  • Frequency measurement to 20 kHz
  • Min/Max/Average/Hold/Relative modes
  • Diode Test and Continuity Beeper
  • Simultaneous mA and % of scale readout
  • 20 mA DC current source / loop calibrator / simulator
  • Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
  • Externally accessible battery for easy battery changes


Safety Conformance Meets 1000 Volt EN61010-1 CAT III standards and 600 Volt EN61010-1 CAT IV standards.

 

Technical Specification for: Fluke 789 ProcessMeter™ with ir3000

General Specifications
Voltage range 0 - 1000V AC DC
Voltage Resolution 0.1mV to 1.0V
Current Range 0-1A 0-30mA
Current Resolution 1mA 0.001mA
24V Loop Power Supply True
DMM and Loop Calibrator True

 

Accessory Code Description Price (Ex VAT)
700ILF In-Line Filter £91.00 ADD
700TC1 Thermocouple Plug Kits (10 types) £121.00 ADD
700TC2 Thermocouple Plug Kits (5 types) £97.00 ADD
BE9005 240 Battery Eliminator price on request
BP7235 NiMH Battery Pack £236.00 ADD
C700 Hard Case (700 Series) £297.00 ADD
Fluke 700TLK 700TLK 3829398 Process Test Lead Kit £140.00 ADD
FVF-Basic FlukeView Forms Basic + IR USB cable (189 287 289 789 1550B) £142.00 ADD
FVF-SC2 FlukeView Forms Software + IR USB-Cable (180 Series 1653 789 1550B) £242.00 ADD
IR189USB IR Cable - USB (280/180 Series 1653 789 1550B) £44.00 ADD

 

Product Training 1/2 Day more info
Product Awareness Course

Get to know your new purchase! Maximise your return on investment with product and software training modules!

A lack of product training can result in under-utilisation of test equipment, low return on investment and, most importantly, incorrect use.

Product Training 1 Day more info
Product Awareness Course

Get to know your new purchase! Maximise your return on investment with product and software training modules!

A lack of product training can result in under-utilisation of test equipment, low return on investment and, most importantly, incorrect use.