Fameca SPCCS100SI Power Cables Spiking and Cutting Tool
The Fameca SPCCS100SI has been designed with the following functions:
- Spiking cable to check and ensure the absence of voltage on LV and MV underground cables
- Allows safe cutting after spiking operation
- Total security for the user according to NFC 18510
The PICOUP ultra-safe are integrated electro-hydraulic cable cutters without hydraulic hose to check the absence of voltage on underground power cables. Use the following cables:
Fameca SPCCS100SI Key Features:
- 2 actions combined into one single tool (spiking and cutting)
- Enables the user to limit any resulting short circuit to a single-phase/ground fault when spiking multi-core cables
- This causes any protective devices to trip before a 2 or 3 phases fault can be created
- In the event of spiking a live cable, the spiking blade can be replaced easily (minimising cost impact)
- No physical connection between the tool and the user
- Damage to infrastructure is minimised when spiking as a single phase to earth fault is created using a dedicated, local 70mm² copper earthing cable
- Cutting failure sensor
- Indication on the remote at the end of the cutting operation
- Hydraulic over-pressure safety valve
- Battery indicator for charge status
- Start of cutting is prevented if the battery is low
- Cutting capacity: diameter 140 mm
- Metal armour: round wires 4 mm
- Cutting force: 21000 kg
- 24V DC operation
- Autonomy: 20 cuts
- Dimensions L x W x H: 678 x 188 x 320 mm
- Weight: 20 kg
Hardware diagram of the Fameca SPCCS100SI:
- Heat treated steel blade: (50HRC) with non-fooling spike (55HRC) (easy disassembling)
- Blade guard: will lock in an opened position if required for better handling heat
- Narrow cutting head: for easy positioning between cables
- 3 fixed points
- Electric connector: with locking cap, positioned on the top of the tool for a better protection
- Manual selector: reopens blades by spring (force: 1 ton)
- Functional and easy to use remote control Range: up to 150 m
Note: Be sure to check the official datasheet before buying, and the user manual before using any test equipment. Need training? Just reach out - we’re happy to help